LUVTruck.com • View topic

View unanswered posts | View active topics

Board index » Technical » Stock Trucks

All times are UTC - 6 hours

The right Weber

Page 1 of 1

[ 9 posts ]

Previous topic | Next topic

Author

Message

rigel

Post subject: The right Weber

Posted: Sun Mar 26, 2006 6:00 pm

Senior Member

Joined: Sat Mar 01, 2003 9:10 pm
Posts: 88

Ok I have an 81 4x4 with the 1.8. I know I need the 32/36 but I belive I need the auto choke right?

Can a mech choke be made to work with my truck?

With my limited finances I do not want to make a mistake.

Rigel

_________________
81 LUV 4x4 Red Was a heavy hauler now is back to mostly stock config.

http://www.Rigeltech.com

Top

800xl

Post subject:

Posted: Mon Mar 27, 2006 1:25 am

Addicted to LUV

Joined: Tue Jan 21, 2003 11:20 pm
Posts: 2825
Location: McMinnville, OR

A manual choke will work, but you'll need to run a cable into the cab somewhere. The electric auto choke just makes it easier to drop on and run. Avoid the water activated choke unless you want to do a pretty intricate plumbing project.

Top

rigel

Post subject:

Posted: Mon Mar 27, 2006 8:22 am

Senior Member

Joined: Sat Mar 01, 2003 9:10 pm
Posts: 88

Pardon my ingorance,

Is that the
DGEV
DGAV
or something diff?

Rigel

_________________
81 LUV 4x4 Red Was a heavy hauler now is back to mostly stock config.

http://www.Rigeltech.com

Top

Robertcda

Post subject: choke

Posted: Mon Mar 27, 2006 9:08 am

da LUV masta

Joined: Mon Aug 11, 2003 2:35 pm
Posts: 515
Location: NE Washington, USA

dgev

Top

cb6tig1

Post subject:

Posted: Mon Mar 27, 2006 3:21 pm

LUVTruck.com Lifer

Joined: Mon Dec 22, 2003 11:34 pm
Posts: 773
Location: Caldwell ID

You dont need no stinking choke. :lol:

i dont have 1 on my luv .

i just like it with out it . ihave all was had probles with it .
ethere its working to good or not at all.

_________________

4.3l V6. 5 speed MT 2.55 in the back.

Top

rigel

Post subject:

Posted: Sun Apr 02, 2006 7:31 pm

Senior Member

Joined: Sat Mar 01, 2003 9:10 pm
Posts: 88

Does "IT" have to be a dgev or will any electric choke work?
I have seen these on ebay.

http://cgi.ebay.com/ebaymotors/Weber-32 ... 6901QQrdZ1
http://cgi.ebay.com/ebaymotors/BMW-2002 ... 3720QQrdZ1
http://cgi.ebay.com/ebaymotors/Weber-Ca ... 8789QQrdZ1

Thanks
Rigel

_________________
81 LUV 4x4 Red Was a heavy hauler now is back to mostly stock config.

http://www.Rigeltech.com

Top

Tea Kettle

Post subject:

Posted: Sun Apr 02, 2006 8:51 pm

Senior Member

Joined: Fri Jan 13, 2006 10:32 pm
Posts: 77

get an electric choke itll take a fewmornings to adjust it perfectly but its the way to go !!!!! :smt030

Top

rigel

Post subject:

Posted: Mon Apr 03, 2006 9:37 pm

Senior Member

Joined: Sat Mar 01, 2003 9:10 pm
Posts: 88

Well I got a Weber 32/36 DGAV, I hope I can make it work.
If not then back on ebay it will go.
There were no DGEV's To be had for the money I had.

Rigel

_________________
81 LUV 4x4 Red Was a heavy hauler now is back to mostly stock config.

http://www.Rigeltech.com

Top

800xl

Post subject:

Posted: Mon Apr 03, 2006 11:53 pm

Addicted to LUV

Joined: Tue Jan 21, 2003 11:20 pm
Posts: 2825
Location: McMinnville, OR

DGV, DGEV, DGAV are all the same carb body so it will fit. They are all basically a DGV. The different models might have an extra vac port here or there or different chokes but the base carb is the same. If its one of the three and has an electric choke, then its what you are looking for.

Top

Page 1 of 1

[ 9 posts ]

Board index » Technical » Stock Trucks

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 25 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum