LUVTruck.com

Got this adapter to install a weber on the luv:

http://www.jameng.com/products/images/99004.250.jpg


Does not look like it will work. Should I have gotten this one?

http://www.jameng.com/products/images/99004.300.jpg

the one you got is the better one of the 2

_________________
My old but now gone Luv...

On the one I have, the bolt holes match up for the weber carb, but the other end does not match up, with the stock carb. I have a spare carb that I was matching it up to. Have not removed the carb from the truck yet.

what one was that for? i was told datsun and luv where the same..., i have seen them on the luv

_________________
My old but now gone Luv...

Here are the discriptions for the 250 and 300:

99004.250: Toyota, Chevy Nova carb adapter.
Adapts DGV series Weber carbs to Toyota and Chevy Nova manifolds on 2TC, 3TC, 4AC, 4AGE, and 4ALC engines. Manifold studs measure 4.405" x 2" (112mm x 50mm) center to center.

99004.300: Nissan, Suzuki one piece carb adapter.
Adapts DGV series Weber carbs to some Nissan and Suzuki manifolds. Manifold studs measure 3.150" x 1.740" (80mm x 44mm) center to center.

Measured the bolt holes on the spare carb, they are 3.150" x 1.740" . The 300 should work. They also have a two piece adapter that shouild work(333) .

99004.333: Japanese two piece carb adapter.
Adapts DGV series Weber carbs to some Chevy Luv, Dodge Colt/Champ, Ford Courier, Isuzu, Mazda, Nissan, Suzuki & Toyota mainfolds. Manifold studs measure 3.150" x 1.740" (80mm x 44mm) center to center.


Think I'll give that one a try. It even lists the Luv for the 333.

the .333 is the one most every one has on the luv, its what i have right now...but if you ever find a hi rise one for the luv snag it they work better

_________________
My old but now gone Luv...

I kinda hae a related question but couldnt you build a spacer for a highrise or would there be issues that i am over looking?

-dustin

_________________
My LUV - R.I.P. 1979-2009, you will not be forgotten...

yes you could ...just use some 1 or 2 inch aluminum stock... should be easy

_________________
My old but now gone Luv...