LUVTruck.com

for a four speed cable clutch 18 spline i will give 50 bucks for it please check your donor vehicles the junkyard luvs anything please i will even pay for you extra time.........i need this part for my luv bad

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

I went a looked at an old drive shaft I have in the back and it has way over 18 splines in the yoke. More like 30 or so. Sorry, I tried.

_________________
OK, I'm over it. Where's the beer?

its all good buddy thanks for lookin.....i just need this part to get on the road again.....so yea all you other guys out there please please please look

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

I ll check my donor vehicle tomorrow

thanks man check it out for me please its 18 splines that the key lol

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

i still need this check the parts truck and the junk yards

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

look look look please guys im begging

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

Have you checked a trans. or drive line shop?

_________________
OK, I'm over it. Where's the beer?

Which flange do you need? Is it the one that bolts on the rear end or is it the slip yoke that goes into the trans? My spare trans is 10 or 11 splines and I have a rear end here that I will pull the flange off of if that is the one you need.

_________________
Certified pilots, looking down on people since 1903.

i need the slip yoke but mine is 18 splines.......would you sell the whole tranny and the yoke

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

I dont have the driveline or slip yoke, sorry.

_________________
Certified pilots, looking down on people since 1903.

too bad I had an idea but then realized it was dumb, I was thinking for a temporary fix to just weld the bastard on there but uh one problem screwed up shaft. I mean if it was a one time use maybe. Okay I'm done.

James

its all good man i just need to get it fixed at least you gave it some thought lol

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

??????????/

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

hey man, im here in joplin to, what trucks had the yoke your looking for, i have a driveshaft outta a 78 auto truck and a 79 4 speed truck..

the truck have the stock tranny in it?...ill take a look and see what i have

_________________
just your average bagged v8 mini truck

I also have a 10 spline.... but I do have the 4 speed transmission to match it.... however, it does need someone to go through it, I dont think its ever been rebuilt before

no i got it now guys......solution......i bought a four wheel drive luv and we have been restoring it for the past two months....i will have pics when done with it and as for the 78......its getting four more cylinders lol

_________________
Arquing with me is like running in the special olympics, even if you win your still retarded.

So you are putting a v8 in it. This I gotta see. Hope you raise it nice and high to get it in to clear everything. Harder than a 2 wheeler.

_________________
Too much to do and not enough time or money!
Courage is the other side of fear!
Pain is the weakness leaving the body!