LUVTruck.com • View topic

View unanswered posts | View active topics

Board index » Technical » Modified Trucks - Drivetrain

All times are UTC - 6 hours

Timing marks

Page 1 of 1

[ 5 posts ]

Previous topic | Next topic

Author

Message

nolesumner

Post subject: Timing marks

Posted: Wed Mar 31, 2004 2:08 pm

I am trying to locate the timing marks on an 80 model 1.8L Luv truck. Shouldn't it be a groove on the crankshaft pulley? I tried cleaning it and looking for a mark to line up with the raised embossed pointer deal, but I can't seem to locate one. Is there a secret I don't know about or am I not getting the pulley clean enough to locate the mark. Thanks in advance.
Missy

Top

chevluvguy

Post subject:

Posted: Wed Mar 31, 2004 8:15 pm

the mark on the crank is very light, i mean it's not very deep

Top

nolesumner

Post subject: Thanks

Posted: Thu Apr 01, 2004 9:33 am

Thanks a bunch, I'll clean it up and take another look.

Top

chevluvguy

Post subject:

Posted: Thu Apr 01, 2004 2:31 pm

you're welcome

Top

vbstdnt5

Post subject:

Posted: Thu Apr 01, 2004 4:16 pm

If you take the disptributor cap off, turn the motor so that the roter points to the #1 plug wire on top of the cap. On mine...the roter points at the ground wire on the distributor. Once you have done this, look down at the crank pully. There should be a notch on the INSIDE of the pully right at about TDC mark.

Top

Page 1 of 1

[ 5 posts ]

Board index » Technical » Modified Trucks - Drivetrain

All times are UTC - 6 hours

Who is online

Users browsing this forum: No registered users and 14 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum