LUVTruck.com

Dont want to put junk in there now that I have the motor and tranny out. Wondering what the best replacement for the stock clutch is. Thanks for any advice/experience and or opinions.
Jeremy

and yes.... I used the search tab and all I could find was the 80 4x4 clutch disc is a bigger size.... will this work with my flywheel? Anything else out there any better or is that about it?

anybody?

I used a 4wd clutch in my 2wd when it still had the stock isuzu engine,bolts right up. The 2wd flywheel is the same part number as the 4wd last time I did this.

_________________
1975 V8 Luv
1980 Bagged Luv

did it hold up good and not slip?

nope never had any problems slipping with the 4wd clutch. The 2wd clutch shouldnt slip either, I went with the 4wd clutch cause it was a bolt in, and it had more surface area for peace of mind really. I drove the truck hard too.

_________________
1975 V8 Luv
1980 Bagged Luv

awesome.... just the answer I was looking for. Thankyou

I think the stock one from Parts America I put in lasted about 10 years. I don't drive hard, but a lot of around town constantly starting and stopping. I also haul heavy loads sometimes.

the 79/87 4X4 clutch is 8"

how small is the 71/80 2WD clutch?
7.5" 7.75"

thats real little!

_________________
86trooperT/D 2.2
84 L\B 4x4Diesel LS 2.2
84 S\B 4X4 gas rust bucket 1.9
86 L\B 4X4 gas 5 speed 2.3
the twins, 81 pup and 81 LUV both are diesel 2.2



The Energizer Bunny is trying to keep up, and is starting to gasp for air!!