LUVTruck.com

So if i was to put coil overs on my Luv everyone has told me that i should take the torsion bars out. Should i put anything in the torsion bars place or just rip them out and put the coil overs in.

_________________
"If it wont fit, force it, if it breaks, then it needed to be replaced anyway..."

The coil spring in the coil overs should do the work that the torsion bar does now if you have the right size/wt coil spring.

_________________
OK, I'm over it. Where's the beer?

Check out this post I think it may help with some of the questions:

http://forums.luvtruck.com/viewtopic.php?f=7&t=16951&hilit=coilover

so that guy basically took out the whole middle part of the suspension and just left it the upper and lower control arms? is that what your getting at??

_________________
"If it wont fit, force it, if it breaks, then it needed to be replaced anyway..."

yes in a way. the coilover does the job of the torsion bars so you dont need those and the adjuster and so forth. you have to mod the shock tower fit the coilover depens on what type you get.

_________________
LUV is not just an emotion, its what you DRIVE.
-------------------------------------------------------
1975 luv daily driver.
&
Project-soon to be revived

ok thanks for the info...

_________________
"If it wont fit, force it, if it breaks, then it needed to be replaced anyway..."