i do miss driving a truck
...... but really i dont care as long as the vehical gets me there and back, and not too many peices fall off along the way
.....that s-10 was JUST what i've been looking for tho. 4.3, extended cab so if i ever have to take both my kids somewhere. automatic b/c the wife refuses to learn to drive a stick
. and 4x4 ....well just cuase
and bcg: heres how i did the flamed tails. (copy and pasted from another thread
)
ok, here goes: i traced a stencil off a decal i got in the rear window, got a skull in the center w/ flames out each side got it at autozone. i then used a copy machine to enlarge it to the correct size. trace THAT onto a stiffer peice of poster board and CAREFULLY cut the flame out, remove taillights and sand and wash them (sanded the DOT numbers off too) then mask the desired area, lay the poster board cutout on it and tape it down as best as you can, i ended up cutting some little slivers of tape to get the ends right. then trace that to the tape. use a x-acto to cut out the flames, trying to cut ONLY through the tape. remove the out side tape. remember you wanna leave tape on the flames only remove the outside area.
then PAINT THE FU*K OUTTA EM!!!!!!! it took 6 GOOD coats of flat black to keep the light from showing through, i just used rattle can, then after its good and dry remove the tape and i put 2 coats of clear over it, again rattle can.
Login
FAQ
Search
).
