LUVTruck.com

ok so i have an 85 trooper 2 it is all stock it has the g 200 w a/c and the 4 spd manual the piston rings are shot in the g 200 so i now have the 2.6 out of a 90 4 dr trooper and i want to put it in my trooper i've read some things here and there but i now need hard facts as to what i have in front of me (1. clutch size (2.fire wall (3. oil pan the 2.6 is a two piece deep sump pan (4.motor mounts (5. fuel pump, i have the pump from the tank and i need to wire it or something else and the relays for the pump and anything else i am missing i have all of the engine ecu wiring i don't want this project to stall out and not be completed so i am in need of help all and any i can get would so help full and if any one wants to help wrench to thats would be awsome to thank you steven

There is an isuzu website alot like this one. Not sure of the exact site name but a google search might help you find it.

_________________
In life there is the "Way things should be" and then "There's the way they are".

2005 Silverado 3/4T Crew Cab
1981 Luv 2WD
1979 Luv 4x4 Currently going through Open Heart and Cosmetic surgery
1995 Roughneck JetBoat
1981 Luv parts trk

might be a good start

http://www.ozgemini.com
http://forum.planetisuzoo.com

_________________
Friends don't let friends drive stock...
76 mikado, emissions delete, dual alternator, rejetted 1.9 carb swap, non factory body lines
soon non points distributor, single (semi sealed beam) head light conversion