LUVTruck.com

Has anyone tried unicoils to get the correct angles of the smog hoses needed on a luv?
http://www.gates-unicoil.com/
90 degree elbow connectors arent working.
i have the 5/8 heater hose but it kinks?

_________________
What part is this?
What is it for?
How Do I test it?
Where do i get a new one?
Are we there yet??

I'm sure they would take out most of the kink, but the emission hoses make some pretty sharp turns. I was actually thinking about making all my emission lines hard lines, then putting the nice red/blue Steele hose covers on um.

i read about cloth tape on it but the little l shaped one on mine is shot. has gash holes.
the littlest one is the one i have to fix- need it for smogging for sure.

_________________
What part is this?
What is it for?
How Do I test it?
Where do i get a new one?
Are we there yet??

Hit up the local salvage yards in your area and hopefully you can find a luv that has these hoses, search these forums, there are a lot of ppl that take the smog off, maybe they still have some parts and pieces laying around.

Sometimes your local parts store has a bin in the back with many misc. hoses in it. They might let you go dig through it to see if you can make one work for you.

_________________
OK, I'm over it. Where's the beer?

I was just looking at air pump
hoses on mine as the inspection is coming up
I had considered making them out of 3/4"
Stainless steel tubing as I have most of what
I would need free at work. Just a thoughtful all needs these
Hoses?

SRAD

_________________
My Wife is faster than you think you are

This is what I've done in the past. You may need to trim off part of a hose to get what you want, or take two different hoses and couple them together. You get the idea.

thanks

_________________
What part is this?
What is it for?
How Do I test it?
Where do i get a new one?
Are we there yet??

I was thinking a piecemof stainless the same size as the nipple the hose slips over bent to fit wold only need a small piece of rubber hose on each end and would last forever.
SRAD

_________________
My Wife is faster than you think you are

I'll take a hard line set up for the emission hoses if you are going to attempt a "kit"...,

and what will be finished price hmmmm

_________________
What part is this?
What is it for?
How Do I test it?
Where do i get a new one?
Are we there yet??