Running a 26x10 slick here, on a 15" rim.
I made my traction bars because I counldn't find any that fit the way I wanted. I ended up welding a piece of 2x2, 190 wall, square stock to the bottom of my u-bolt plates. The 2x2 steel has a rubber snubber at the end that lines up with the front leaf spring bushing on the frame.
This setup works the best so far. 4.56 gears, 12lbs. of tire pressure, around 500hp, no tire spin, 1.59 60ft. times with a small tire warming burnout.
_________________ If at first you don't succeed, try it like your wife told you to do it.
|