|
u can pick up some shackles at yur local auto parts store for less than $20 autozone has them here. the torsion bar bolts are mid way of the truck. crawl underneath it and the head of the bolts will be pointing down. they will be on a bracket attached to the frame. you will see a bar (the torsion bar) running from them (one on each side of the truck) up to the front end. you should let them soak in wd40 a couple days before. to make sure you don't break them. jack up the front end so the wheels are off the ground. and tighten them down. go a couple of turns on each side and let it down to see if its high enough, if not repeat the steps again. as far as another lift you could install some add a leafs on the rear springs instead of shackles, or you could install some overloads. i have some coil over, over loads that clamp to the shock. you could also install a body lift. jc whittney sells a 2" and a 3" you will probably have to install a body lift unless you want to trim your fenders and the fender well.
_________________
1980 chevy luv 4x4 1.8 liter
1979 luv long bed parts truck
1984 2wd isuzu pup parts truck
"A man who says it can't be done shouldn't interrupt a man doing it."
|
Login
FAQ
Search
