|
Junior Member |
Joined: Sun Oct 25, 2015 10:51 pm Posts: 6
|
I just recently cranked the tortions on my stock 80 4x4 12 turns to fit some 225 75 15s, I'm gonna make some longer shackles but I'm wondering about the inner sleeve to go in the bushings? The stock shackles don't have a sleeve as the threads just taper down to fit through. I can find the bushings no problem but can't seem to find any sleeves. I don't want to drill a hole that big in the shackles to just use a bolt as the "sleeve" any experience with this would be great to hear. Also, is there kind of a rule of thumb on how many shims to take out in relation to cranks on tortions? Thanks
|
|