LUVTruck.com

I eventually want to do a stock floor BD. That being said, in the mean time I would like to do a simple bag job w/o doing a notch. I want it lower but don't want to put the time and money into doing a notch and all the other stuff if Im going to bd it. How difficult would it be to have bag mounts made up and attached? Also, if that's too much of a pain to do what about doing a coil over setup so it'll ride low and with a decient ride quality?

It is not that anyone will not answer your question, the bag-body drop guys will need to check in and see your post.
You might try the search function too.

_________________
75 Luv, 350 V8, TH350, Camaro rearend. New 1975 Luv Step side. Stock for now.
Grandmaster of the "Shade Tree" way.. I can't see the yard for all the cars. Come on down and we will sit on the porch and watch the grass grow.

thanks, I've been in contact with some of them via PM

In my head that will be a waste of time if your going to BD it anyway. If you want it lowered then just pull 2 leafs and put some blocks. No harm in cheap lowering job.

_________________
"You know you gotta LUV me"

so what have you decided to do?

_________________
LUV is not just an emotion, its what you DRIVE.
-------------------------------------------------------
1975 luv daily driver.
&
Project-soon to be revived

for sure Im going to crank down the torsions and use drop blocks for now. Then I think I'm going to do coilover conversion. I don't trust any shops in Vegas. So, I'd like to get in contact with someone on this site to do all of my work. I will need everything shaved, body dropped, bagged, engine work, irs and lug conversion. I want this truck perfect. I am looking into getting a range rover as my daily so I can leave the truck for a year or so to get work done. I want my truck to win trophys and my job is to stressful for me to spend time and effort on doing the work myself.

the place that i work has built some of the bad-est show trucks out there but there are a lot of great shops put you can look at sum of the work we have done we are in porterville and had stuff in mini truckn and truckin but this is a great place go to http://www.myspace.com/kutsrus or his web page http://WWW.KUTSRUS.COM (559-784-5887)if you have any ? drop me a pm and you can look at my myspace its at the bottom also i am just 1 hour from ?uestLuv we are going to have a luv meet for the bakers porterville and all close to us

_________________
http://www.facebook.com/ez.cracker
dangerous-toys4life
73 3-door avalanche bdydropped on 18s
86 1-ton 4x crewcab short bd 15"lift
75 k-5 2x
94 king cab

thats all really clean work. I just want to make sure that whoever does my truck does it with love, no pun intended. I don't want it to be just another job. I just can't wait to drive it. It looks soo lonely in my friends yard.

the best part if it comes here is i will be workin on it as well and you see my luv and i know what you are saying this shop is one of the best ones around and i am not just saying that because i work out there i work out there because of the workmanship he has done in the past and present i also have known him since Jr high lol

_________________
http://www.facebook.com/ez.cracker
dangerous-toys4life
73 3-door avalanche bdydropped on 18s
86 1-ton 4x crewcab short bd 15"lift
75 k-5 2x
94 king cab