I'm putting a 2.6 into my 1980 LUV 4x4 and last night as I was installing it, I cant seem the get the motor to sit where it should on the motor mounts. the stud on the mounts won't go into the hole. I'm using the 2.6 mounts and bolted them to the LUV so i'm wondering if maybe where the 2.6 mounted in the trooper was wider than where the LUV mounts? I'm not really sure what's going on here. also I used a 2.3 oil pan for clearance and unfortunately it appears to be hitting the front differential. not sure if that could have something to do with it cause I was told specifically to use the 2.3 oil pan for clearance on the 4x4. Any help would be appreciated! Thank you!
_________________
1980 4x4 LUV, 3 inch body lift, 4.56 gears, 31x12.50r15 Super Swamper IROKs, Weber Carb, Electronic distributor,