LUVTruck.com

Im sure this has been covered in previous discussions but I never really found the exact way to do this. I have a 1985 Luv and need to run a 5x4.75 front hub. I know some of the Toyota swaps make it a 5x4.50. Is there a direct bolt on to get the 5x4.75 other than the Aerospacecomponents.com way? Its just alittle too pricey for me. Any S-10, later model Toyota's, etc? Any help is appreciated thanks!!!

Not sure on the conversion but there are quite a few members that have converted, my main question is
are you sure you have an 85???

_________________
Click on C.M. logo to go to my webpage


RIP R.J.B.

Ooops sorry '82 thanks typing and talking don't mix.

Not sure about 81-82s but i used Toyota rotor/hubs on my 78 but they were 4.5 so your options are few.

_________________
1978 pro street step/side 455Buick, 4sp,4.11s, 31/18.5s

You can have the toyota rotors redrilled for the larger pattern...

_________________
If you think no one cares, try missing a couple of payments...



FIAA!

SFPP!

Do the Toyota hubs and rotors fit without swapping the control arms?

Yes but you need to machine spacers for the bearings to fit.

Check back on some of my posts and pic's and you can find the dimensions needed.

_________________
1978 pro street step/side 455Buick, 4sp,4.11s, 31/18.5s

My friend designed his own 5 lug disk brake conversions for a while with the intention of offering a kit for sale but there wasn't enough positive response for him to justify having a shop set up tooling to mass produce the kits. If you are still interested, I can ask him if he will make a few setups. They run about $500 + shipping and include modified S10 rotors, pads, custom caliper mounts, calipers, bearings, basically everything you need to convert to 5 lug Chevy pattern (4 3/4") front disk brakes.

_________________
1978 LUV Truck 2WD
450 "Small Block" Chevy
3.70 Ford 9
28x10 Goodyears