LUVTruck.com

So i picked up a 2.3 FI isuzu to put in my 79 4 wheel drive. THe motor has recently been gone through, but i've been tearing it down and 'checking"..
got it all painted up, and getting ready to put the engine into the truck. When i bought the engine, i also had all the wiring and the ecu given to me. I cannot, however, find where the ECU plugs in. I'm pretty savvy with engine wiring, done a few FI conversions and what not on other vehicles. I guess, i just need to figure out how the engine harness (that come out right on the manifold) plugs into the ECU, (which i cannon find the plugs for the life of me that plug into that)...so..here i am with 3 or 4 sections of the wiring from the donor truck, and nothing to go on:
so:
i need a picture of what the ECU plugs look like for a 2.3 ITEC
and or the picutres of the plugs on the engine:

also:
IF...i'm missing this seciton of the harness (likly my luck)>>>
i need either an ECU harness for this portion, or just the plug ends for the ECU, and the plug ends for the engine harness....
(i have a pin readout for the ECU , so i can wire the two together)
any help would be AWESOME...ready to get this luv on the road and hopefully join the gang!
thanks guys

josh