LUVTruck.com

mkay, i forgot what size the g200 clutch size is. i keep thinkin its 8.6inches, but im not sure. i was lookin on summit for a new clutch, and they have 9.4in clutches for an isuzu. im thinkin that just for the 4z motor?

but anyways, i just need to know what the size is for when i order my clutch. the stock on i put in 3 months ago is already goin out, so id like to upgrade to a centerforce.

_________________
"but its that gut feeling of you're drawn to what feels right for yourself and what you're passionate about..."

9.4" sounds like a 4Z clutch alright. The G180s and G200s post 80 should take the 8.6". Before that it was an 8" except for the 1980 4x4s that got the 8.6". Im not 100% on those figures but im perty shure thats how it breaks down.

_________________
1980 LUV 4x4, going under re-construction...

well i finally remembered to choose the engine size on the summit thing. the g200 1949cc motor has the 8.594in clutch. the 9.4 is for the 2.6. the 2.3 still uses the 8.6. id like to have a 9.4in clucth in the pup though!!

_________________
"but its that gut feeling of you're drawn to what feels right for yourself and what you're passionate about..."

yeah i have to use ceramic clutches so i have one that lasts. The last parts store clutch lasted me 30K miles is all

_________________
1980 LUV 4x4, going under re-construction...

do ya'll ever read old post?

I do and I was wondering if I could get
a larger clutch. Or maybe a increased
pressure clutch

_________________
the only replacement for displacement is technology.

For what motor?????


Inches, ppfft.

The G200Z and 4ZD1 2.3L are 215mm. It is the same clutch but the flywheels have different mounting bolt patterns to the crank.
The 4ZE1 2.6L is 235mm but it is a totally different shaped flywheel, you can use this Flywheel on the 2L turbo or a 2.3L.


You will not get a bigger clutch to fit, you will need to find an uprated clutch. They are readily available here so i dont see why you would not be able to get one over in the US.

Bob

_________________
Current project, 1979 KB Isuzu Ute.

Daily driver, '86 Rodeo Spacecab.
Chasing parts for Isuzu Impulse.