LUVTruck.com

Im Looking For Some That Can Modify My Hubs Or Has Modified Hubs Already To Sell Or If You Have Any Info On Where I Can Get This Done If You Can Or Do Email Me @ Goodfella8699@aol.com

Thank For Your Help

Dan

Welcome to the site check out the post under front spindles i posted a place i'm sending mine to .

moser engineering used to do them but someone said they were gonna stop you might call to verify.

Moser Engineering Stoped Doing This Service

Your best option is to check the machine shops in your area that can do this service. Moser had an excellent track record with correctly doing this mod, thats why everybody sent their hubs to them. It was worth paying shipping cost. Ask around and talk to some people that have had theirs worked.

_________________
Previous setup: 4.1 Buick V-6/TH 350
Current setup: 400 Small Block Chevy V-8/TH 350
9" ford rear end/short bed/blue
What do Water, Electricity and Humans have in common... They all travel the path of least resistance.

hey i found a machinest that made me some adapters that let you use front runners. he made mine for 150.00 I can replace my rotors when they go bad without having to modify anything else! my blown luv runs 9.90@ 138mph! If you want a # e-mail me!

they let you run adapters at the track? a friend tried that once and they said they wouldn`t even consider letting him run. with adapters on. they were on the front also.i know nhra book says no to them but he thought he could sneak past the tec guys with them.

_________________
don`t have the luv no more but I still like em.72 el camino,
00 & 06 silverado one 4x4, turboed vw sandrail,99 banshee, 06 raptor 700, 02 polaris trailblazer.