LUVTruck.com

So i think my pinion nut has backed off again on the rear axle of my truck. Only problem is i dont know what size the socket is and im too lazy to drop the driveshaft and steal some caliper from work to measure it. So 800XL what size is it?

_________________
1980 LUV 4x4, going under re-construction...

I want to say a 1 1/4" socket fits it, I'll go out and check in a bit though. I've got a six sided impact socket I keep around especially for that sucker, so I'll just see what size it is.

_________________
95 Isuzu Trooper Daily Driver
86 Isuzu Trooper reliable backup
77 LUV 2wd stock beltway blaster (resting)
79 4x4 LUV project: 2.6L, 5spd, 31s (eventually)

MEPR: Man, my 4x4 makes all other LUVs look good

1 1/4" is the size of the one I use. That translates to 31.75mm so I'm not sure if it is actually a 31 or a 32. I can't remember if the socket I've got fits loose or snug, and it is an old well used impact impact socket so it could be worn some.

_________________
95 Isuzu Trooper Daily Driver
86 Isuzu Trooper reliable backup
77 LUV 2wd stock beltway blaster (resting)
79 4x4 LUV project: 2.6L, 5spd, 31s (eventually)

MEPR: Man, my 4x4 makes all other LUVs look good

ok cool ill just pickup a 31 and a 32 socket then to be safe. Thanks a bunch

_________________
1980 LUV 4x4, going under re-construction...