LUVTruck.com

Are you talking about the pipe that comes off the exhaust back into the carb? Mine fell of a while back and I just plugged it off. It's hot, so make sure you do it properly. Rubber doesn't work. That is an annoying noise, isn't it?

ok so it doesnt hurt the engine then right. And it is anoying (thankfully my bro is letting me borow his car untill i fix my truck) but i drowned out a little hondas glasspack and his system when i reved!

Yup.... all it does is make all the exhaust go through the pipe instead of letting some get burned back off through the engine again. Plug it off and drive it.

did the honda have a gallon green bean can on it? (the big tater shooter mounted under the ass end of a bone stock honda with no more power than my luv on 3 cylinders.) i am a firm believer in NOT having stupid exhaust tips

_________________
Hammer to fit, paint to match.
If it aint broke, don't fix it.
There's always room for duct tape and bailing wire.

WATCH YOUR PIEHOLE!!!!!!

Good call grimace...

bad exhaust tips

Hey grimace,
Define stupid, Does a monza tip with 3 feet of flexpipe right off the header count as stupid? Keep in mind that the tip has NO baffle or glass left in it,
Maybe thats why my nieghbors still don't like me??? BTW you can't see any of it it is all under the truck. I take no offense just wanted your opinion.

Dave

NO sir i do not call that stupid . i call that "personalizing your truck" with no money !! seriously, i wish i could stick a picture in with my signature like larphead and some of the others so you all could see my poor truck. "rode hard and put up wet" done jumped out the wynder. (window). it has these big cannon holes in the frame, metal termites have been gnawin at the body panels, and the nut behind the wheel drinks too much anyway, i am just pissin and moanin at the punks in my neck of the woods who drive too damn fast down residential streets, (shakes fist and shouts DAGNABBIT at the cat). i feel old. i am tired. where am i? who is talking?

_________________
Hammer to fit, paint to match.
If it aint broke, don't fix it.
There's always room for duct tape and bailing wire.

WATCH YOUR PIEHOLE!!!!!!

yup he had one of those 4 1/2" tips (coffe cans as we call em here). The truck is now fixed (hammered a bolt into the exaust fitting and then welded it ) now the project is helping my friend whith his RX-7 he just got. It has an oil leak and in the 5min. we had it in my shop it leacked two spots the size of silver dollars . But hey it was $850

right on. if it runs and you payed less than 1000.00 bucks for it, you got a good deal

_________________
Hammer to fit, paint to match.
If it aint broke, don't fix it.
There's always room for duct tape and bailing wire.

WATCH YOUR PIEHOLE!!!!!!

Hey grimmace, the post before last you really painted a picture of a back woods dude, beater truck, cowboy hat, etc... I had to laugh! but you cant be too far out, your online!

have you seen that commercial, "hey, that thing got a hemmie?!?" LOL.
thats what came to mind

thanx

hmmm... I wonder if you couls fit a 476 race hemmi in a luv...

yeah and the luv has one too haha thanks for bringin me up a notch (takes a puff off of a home rolled cigarette and a swig from moonshine jar)

_________________
Hammer to fit, paint to match.
If it aint broke, don't fix it.
There's always room for duct tape and bailing wire.

WATCH YOUR PIEHOLE!!!!!!