LUVTruck.com

phpBBV3 Message Board
It is currently Thu Mar 28, 2024 6:46 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Jan 23, 2018 2:40 pm 
Offline
Junior Member

Joined: Tue Jan 23, 2018 2:36 pm
Posts: 11
I have a 1979 4x4. Long story short we pulled the front wheel apart to replace the bearings. When we took the bolts out of the locking hub we noticed that they had all been broken off at the ends. I found similar bolts but not exact. I was just wondering if anyone knew the bolt size that was supposed to be here. Thanks


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 24, 2018 7:54 am 
Offline
Assimilated into LUVTruck.com

Joined: Tue Oct 07, 2008 8:07 pm
Posts: 906
Location: N W Arkansas
Which bolts? The small ones that attach the outer cover to the hub body or the larger ones that bolt the hub body to the wheel hub?

_________________
'78 Chevy LUV,1.9,4sp,headers,31's,SAS Dana 30,Dana 20,SOA rear w/Aussie Locker, rough body, bought new 12/4/78.
'87 Trooper,2.3,5sp,headers,31's,ball joint flip & spacer,Aussie Locker rear,Superwinch hubs,brush guard w/5.5K winch,more to come.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jan 24, 2018 8:47 am 
Offline
Junior Member

Joined: Tue Jan 23, 2018 2:36 pm
Posts: 11
They are the 6 bolts that hold the locking mechanism for the 4 wheel drive in place.


Top
 Profile  
Reply with quote  
PostPosted: Thu Jan 25, 2018 8:02 pm 
Offline
Assimilated into LUVTruck.com

Joined: Tue Oct 07, 2008 8:07 pm
Posts: 906
Location: N W Arkansas
Chaselowery wrote:
They are the 6 bolts that hold the locking mechanism for the 4 wheel drive in place.

The bolts that hold the dial & cap to the hub body on a later 17-spline Aisin hub are M6x1.00x15, I would expect your earlier 24-spline hubs to use the same bolt.

_________________
'78 Chevy LUV,1.9,4sp,headers,31's,SAS Dana 30,Dana 20,SOA rear w/Aussie Locker, rough body, bought new 12/4/78.
'87 Trooper,2.3,5sp,headers,31's,ball joint flip & spacer,Aussie Locker rear,Superwinch hubs,brush guard w/5.5K winch,more to come.


Top
 Profile  
Reply with quote  
PostPosted: Fri Jan 26, 2018 10:49 am 
Offline
Junior Member

Joined: Tue Jan 23, 2018 2:36 pm
Posts: 11
The part number is 94029549. I found that in the master parts list on this website.


Top
 Profile  
Reply with quote  
PostPosted: Fri Jan 26, 2018 11:55 am 
Offline
Assimilated into LUVTruck.com

Joined: Tue Oct 07, 2008 8:07 pm
Posts: 906
Location: N W Arkansas
Since your truck is a LUV that should be a GM part number, not an Isuzu part number. A helpful local GM dealer might at least provide the specs but may not be able to order.
Found this after a quick Google of the part number: https://www.ebay.ca/itm/10-CHEVROLET-LU ... 2397292125
and this https://www.ebay.com/itm/NEW-GM-PART-94 ... 4d5f2cae24
and this https://www.ebay.com/itm/New-Genuine-GM ... 635?_ul=HN

_________________
'78 Chevy LUV,1.9,4sp,headers,31's,SAS Dana 30,Dana 20,SOA rear w/Aussie Locker, rough body, bought new 12/4/78.
'87 Trooper,2.3,5sp,headers,31's,ball joint flip & spacer,Aussie Locker rear,Superwinch hubs,brush guard w/5.5K winch,more to come.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 36 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group