LUVTruck.com

I apologize if these questions have been asked before, I tried searching for them with no dice.

1. Can someone take a picture of the cylinder block drain plug on there stock engine? Mine is all hopped up and I can't seem to find it.

2. Where on the block would be best to hook up this kind of stabalizer? http://i.imgur.com/gBQDW6O.jpg

Thank you in advance for the help!

_________________
1979 Base 4x4

I found the drain plug under the exhaust manifold it was all covered by gunk.
The question about where to place my stabalizer still stands though

_________________
1979 Base 4x4

Took all day, but we got the engine out. We used a mounting stud on the front of the engine intake manifold side, a rear mounting stud that held the exhauste manifold on in the rear, one of the bolts that we screwed back from the removed manifold, and one on the intake manifold rear.

_________________
1979 Base 4x4