LUVTruck.com

I have gone and bought locks from Oriellys, Kragens, Autozone, and Napa. None of the Locks fit because the hole is smaller. The Parts world has imputed the wrong info and the only thing I can do is get some good use locks with a key or go to a locksmith. So guys don't waste your time going to the parts store and not even the ones on line work. I did my research and sorry but this is what I came up with. Maybe someone else found a better way?

_________________
Greatness is only Achieved when others Acknowledge what you've known all along.

You are going to have fun finding key blanks too! They are becoming rare.

I found a lock smith where I can get the blanks. Haven's in Fresno ca. They also told me with a little filing I can open up the lock hole and put in a 1978 Monte Carlo door lock set witch is a standard set for most GM cars I 'm not doing that. I just want the original keys and locks. People that have never driven these trucks don't know what they're missing. Thank you for the info.

_________________
Greatness is only Achieved when others Acknowledge what you've known all along.

I just found out a Mercedes Benz key blank works great. i don't know the year but at lest there is a new source.

_________________
Greatness is only Achieved when others Acknowledge what you've known all along.

Post the key manufacturer and blank number...it will help someone else out...like me!

The old Toyota key blanks work too.

The key blanks i have are ilco x54, mb17, and m81x. Hope this helps. More when I get the info. Anyone else have some info please post.

_________________
Greatness is only Achieved when others Acknowledge what you've known all along.