LUVTruck.com

What will fit in the Luv for buckets? The bench in mine is trashed and I think I want to put in buckets.I was thinking S-10 or Camaro. Any thoughts or suggestions?

you can get anything to fit in there so long as you make the right modifications.

if you are looking for an easier way to install buckets, find some seats that have flat mounts and that will make it that much easier to install.

checker sells some for 150 and they are leather seats. if not, just go to a junk yard and start looking. just keep in mind your clearances for seat belts

_________________

To the Oquirr hills for awesome thrills! Go-go 4wd, Activate!

I have 05 Tiburon bucket seats in mine. They fit to the floor pretty good.

_________________

Those look good in there!

_________________
OK, I'm over it. Where's the beer?

I took a pair of bucket seats out of a 90/91 Mitsubishi Eclipse.
They are a little tall, but comfortable. I had to make spaces for one mount on each of the seats.
**Note: One thing to be very careful is the brake/fuel lines under the cab. I came close to one with one of the new bolt holes I drilled out.

_________________
1980 Luv 4x4 with a 5 speed tranny.



"When all else fails, follow the directions".

Thanks. I had to make a couple spacers for mine to.

_________________

I put in buck seats in my 79 and put the frist hole in with the frunt hole near thedriver door and the rest went in with no truble. henry