Going from memory I thing I remember a small plate that holds the shifter into the tail housing. So yank the rubber boot off (or at least out of the way) then you should see a plate at the base of the shifter, it should have three bolts, just undo the bolts and the assembly should come right out. There is a small plastic bushing on the end of it, so just be careful not to lose it or break it. I am not sure where you will find a longer shifter arm. I would also think a 3" lift would not be so much that you need a longer arm. But that's just my opinion.
_________________ LUV Truck Desserter! 76 Daily driver (SOLD) 73 LUV (rusting away at the moment) --------------------------------------------- 63 Nova 74 Camaro
|