So, I'm brand new to Luv trucks, I have a '79 2WD. She was running fine when I got her, but about a week ago she started blowing the Voltage Regulator Fuse. I replaced the Regulator and it seemed to fix the problem, right up until it started happening again. This time I took the Alternator in and tested it finding it to be bad, so I replaced it. But still the same problem. I replaced the new Regulator again, as it was under warranty, just to see if the bad Alternator fried the new Regulator. But still keeps blowing the Regulator fuse.
I also am going to note that I have replaced the old Carb with a brand New Weber one, but this problem was happening and "Fixed" before I installed it.
Has anyone else encountered this problem or has some insight? I really could use an extra opinion.
|