LUVTruck.com

just curious those that are running hookers what kinda clearance do you have between the exhaust pipes and the ground? i was looking at putting on my flow masters today i would only have about 31/4" clearance. thats with a 3" pipe and stock crossmembers. that doesn`t seem like a whole lot to me. and do you guys drag your pipes alot. it looks like i can gain about 2" if i adjust the torrsion up later. terry

_________________
don`t have the luv no more but I still like em.72 el camino,
00 & 06 silverado one 4x4, turboed vw sandrail,99 banshee, 06 raptor 700, 02 polaris trailblazer.

My headers are off two differnt rigs, the drivers side is an s-10 header I think, and the passenger is a camaro. I copied the mechanic who had a set matched up already. they dump just under the floor board and both pipes tuck perfectly back along the sides of the starter/ tranny, and my flosmasers are at a 45 degree angle heading towards the front of my meats.

I have all the ground clearance I need. the oil pan sticks down further, i think. (parked for the winter, cant remember) i put a set of resinating tips on it for looks(no sound alteration, just a hair mellower tone) and BAM! shes good to go.