It's been a while. Got it on the road about a month ago and been scooting around. The rear bumpers not done, just got the basic shape so I could put my whips and lic. plate on
went and got a new yoter straight axle last weekend. Feels like the birfs are bad, one of the hubs is bad. Looking into the ifs hub and brake upgrade. Trailgear is going to suck my bank account dry with this one...
The plan so far for the front is a 3 link with XJ coils, square drive line, six shooters, trunion eliminators, ifs brakes, possibly warn hubs- if not ifs, some knuckle gussets, etc. I'm mostly worried about the coil width on the passenger side and the placement of the panhard mount on the housing, I might need skinnier coils or man up and get coil overs
Someday down the road an fj80 hp third and some dirty 30s
More than likely the rear will be a v6, but if not a normal 4cyl will work fine.
Still in the measurement stage, we'll see where it goes from here