LUVTruck.com

phpBBV3 Message Board
It is currently Thu Mar 28, 2024 4:32 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Tue Feb 12, 2013 7:51 pm 
Offline
Junior Member
User avatar

Joined: Wed Feb 06, 2013 10:29 pm
Posts: 14
Hello All

I wanted to know if you can adjust the valves on the rocker arm and the valve or do have to adjust off the cam and the back of the rocker arm as the manuel speaks of. To my way of thinking it would not make a big differnce or is a differnt setting you would use.

thank you all


Top
 Profile  
Reply with quote  
PostPosted: Tue Feb 12, 2013 10:08 pm 
Offline
Member

Joined: Mon Dec 17, 2012 9:15 am
Posts: 34
I would like to help you friend but I'm unclear about your question. Roll the engine until the back of the cam lobe (the low part) is centered under the cam follower. (The manual says 1 and 4 at TDC but hell you can see the cam right there) adjust the valve with a feeler gauge between the rocker arm and valve. Make sure that the engine is dead cold. ( if you can, do it before you start it for the day.) intake .006 exhaust .010 Easy cheesy.
I hope that was helpful because I really didn't understand your question.


Top
 Profile  
Reply with quote  
PostPosted: Wed Feb 13, 2013 7:23 pm 
Offline
Junior Member
User avatar

Joined: Wed Feb 06, 2013 10:29 pm
Posts: 14
stratpkr wrote:
I would like to help you friend but I'm unclear about your question. Roll the engine until the back of the cam lobe (the low part) is centered under the cam follower. (The manual says 1 and 4 at TDC but hell you can see the cam right there) adjust the valve with a feeler gauge between the rocker arm and valve. Make sure that the engine is dead cold. ( if you can, do it before you start it for the day.) intake .006 exhaust .010 Easy cheesy.
I hope that was helpful because I really didn't understand your question.



Thanks you answered my questions.


Top
 Profile  
Reply with quote  
PostPosted: Wed Feb 13, 2013 10:55 pm 
Offline
Member

Joined: Mon Dec 17, 2012 9:15 am
Posts: 34
Great! glad that I could help Sir.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group